Boundary Wire - Mowox RM 30 Li Instrucciones De Funcionamiento Originales

If you follow the above instructions to cut objects off the mowing area, your robot will
•
cross the two parallel wires -and not cross the single wire around the objects.
• Min. distance between islands: 1 m (3.3 ft). Otherwise, demarcate jointly as one island.
Boundary wires must not cross
each other.
5 . 3 B
5 . 3 B
O U N D
O U N D
Depending on if you intend to aerate your garden's soil, choose from one of the two
installation methods for the boundary wire: You might combine both ways of installation.
Installation on the soil
Attach the boundary wire onto your lawn with pegs, this makes adjustments to the
boundary wire possible during the first few weeks of operation.
Place the boundary wire firmly onto the soil, under the grass, and fasten it to the ground
with the consigned pegs. Make sure that the mower cannot cut the wire at any spot.
Installation in the soil
Rev 19
> 1 m
A R Y W I R E
A R Y W I R E
> 1 m
14 (EN)