Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
G
B
APP+
is a modular device that allows the management via Bluetooth 4.2 of any brand of control panel for automatic gate (damper, barrier, sectional door, etc.), of an electric lock, of a load.
The range of the BT signal in open space is about 60m.
Additional modules can be used to add access control functions (clock module), WLAN management (Wi-Fi module) or LAN management (RJ45 module), radio control (radio module).
ATTENTION: the modules must be inserted in the absence of voltage to be correctly managed by the RIB GATE App.
- The clock module is used to allow access on certain days and at certain times only to certain remote controls (with radio module) or to certain smartphones (via BT, WLAN or LAN). Useful
for companies, camping, parking, holiday homes.
- The Wi-Fi module is used to control the gate from large distances, to manage accesses (if the clock module is installed).
- The RJ45 module is used instead of the Wi-Fi module in case there is no Wi-Fi coverage where the APP+ card is installed. If you do not want to pull cables from the router to the gate, wave
repeaters with an Ethernet port are commercially available.
CONFIGURABLE FEATURES ON APP RIB GATE IF APP+ IS CONNECTED TO CONTROL PANELS OF OTHER BRANDS OR RIB NOT READY, TO AN ELECTRIC LOCK, TO ANY EXTERNAL
LOAD
INSTALLER / ADMINISTRATOR-OWNER / USER PARAMETERS
DISPLAY OF AVAILABLE PLANTS
SINGLE BUTTON FOR OPEN-STOP-CLOSE OR OPEN-CLOSE CONTROLS (depending on how the control panel is configured) on smartphones and Applewatch
GATE CONTROL ACTIVATION WITH SMARTPHONE SHAKING (excludible) - Android only
GATE CONTROL ACTIVATION WITH THE APPROACHING OF THE SMARTPHONE TO THE GATE (excludible) - available with the RIB GATE APP update from January 2019
SIGNALING ON THE APP OF THE GATE/ELECTRIC LOCK STATE - CLOSED/DEACTIVATED or OPEN/ACTIVATED
INSTALLER / ADMINISTRATOR-OWNER PARAMETERS
SMARTPHONE / TRANSMITTER CONTROL ACTIVATION
TEMPORARY ACTIVATION OF USER SMARTPHONE / TRANSMITTER (with clock module) AT SPECIFIC HOURS / DAYS
DISPLAY CARD APP+ TYPE AND CONNECTED MODULES
DISPLAY CARD APP+ SERIAL NUMBER
DISPLAY CARD APP+ FW VERSION
DISPLAY CARD APP+ HW VERSION
INSTALLER PARAMETERS
PROCEDURE TO CHANGE INSTALLER PASSWORD
ADJUSTABLE RELAY ACTIVATION TIME FOR THE CONTROL OF AN ELECTRIC LOCK
RELAY CONFIGURABLE IMPULSIVE (with adjustable activation time) or BISTABLE
FUNCTIONS AVAILABLE WITH RIB CONTROL PANELS L1, L1 24V, B2, B2 24V, B2D 24V, P1, P1 24V
THE APP+ CARD ALLOWS THE APP TO IDENTIFY THE TYPE OF Pc board. THE APP SHOWN THESE SPECIFIC PARAMETERS FOR ITS CONFIGURATION
CONTROL PANEL
INSTALLER / ADMINISTRATOR-OWNER / USER PARAMETERS
8 digits ACCESS CODE TO THE APP (excludible)
DISPLAY OF AVAILABLE PLANTS
OPEN-STOP-CLOSE BUTTON
PEDESTRIAN BUTTON
GATE CONTROL ACTIVATION WITH SMARTPHONE SHAKING (excludible) -
Android only
GATE CONTROL ACTIVATION WITH THE APPROACHING OF THE SMARTPHONE
TO THE GATE (excludible) - available with the RIB GATE APP update from
January 2019
DISPLAY OF CYCLES EXECUTED
Pc board FIRMWARE UPDATE
INSTALLER / ADMINISTRATOR-OWNER PARAMETERS
REMOTE CONTROLS ACTIVATION
SMARTPHONE ACTIVATION
TEMPORARY ACTIIVATION OF USER SMARTPHONE (with clock module) AT
SPECIFIC HOURS / DAYS
WAITING TIME FOR AUTOMATIC TOTAL CLOSING
WAITING TIME FOR AUTOMATIC PEDESTRIAN CLOSING
PEDESTRIAN OPENING TIME
BUZZER
WARNING LIGHT "GATE/BARRIER OPENED"
FLASHER
PREFLASHING
L1
L1 24V
B2
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
10
B2 24V/B2D 24V
P1
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
P1 24V
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Publicidad
Tabla de contenido
