Descargar Imprimir esta página

RIB APP+ Guia De Inicio Rapido página 13

Para administrar la unidad de control a través de bluetooth 4.2

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

CONNECTION OF APP+ TO OBSOLETE RIB (OR NOT RIB) CONTROL PANELS WITH OPEN
GATE SIGNAL
CONNECTION APP+ TO NOT RIB CONTROL PANELS
R => Relay with clean contact activated by the control panel (or magnetic / electromechanical
limit switch installed when the gate is closed). Used by APP+ to know the gate position
(closed / open).
Depending on the status of the contact at rest (NO or NC) it is possible via command in
Advanced Parameters of the RIB GATE App, to invert or not the signals so that they are shown
correctly by the APP (closed / open)
CONNECTION APP+ TO AN ELECTRIC LOCK - WITH ON/OFF SIGNALING
R => 12Vac relay with minimum contacts 5A
CONNECTION APP+ TO CONTROL UNITS RIB 2019
L1, L1 24V, B2, B2 24V, B2D 24V, P1, P1 24V
A+
A-
K-BUTT
COM
COM
SIGNAL
RIB GATE
To activate this card, simply download the RIB GATE App from the Apple Store or Google Play
and register yourself as an installer.
ATTENTION: In an installation company, the first installer who registers himself
will receive a company code. This company code must be used for the
registration of all colleagues, so all the installers of the same company
can share all the systems made.
Once you have registered and feeded the system, the card will appear in the smartphone
APP. Following the various steps you will then be able to enable the remote controls and
smartphones of the various users.
You can give permissions such as:
- Administrator / Owner of the house.
12/24V ac/dc
- User.
- Temporary user.
COM
RIB Cloud => https://cloud.ribind.it
START
With personal account Installer - Administrator / Owner of the house
R
Via web browser it is possible to:
- access to your personal web space where all the registered systems are present.
- insert the installer logo and the installer data (the Users app is updated automatically by
uploading the installer logo and its contact details).
- Automatically download data to the cloud every time the Bluetooth 4.2 signal connects (if
the Wi-Fi signal is not present).
- have access to all the features in the RIB GATE App. They will be available directly to those
who are enabled to interact with the module (installer, administrator / landlord).
- access the log to check people's entries/exits and at what times (Wi-Fi + Clock modules).
12V ac
R
13
G
B
-
+
A
B

Publicidad

loading

Este manual también es adecuado para:

App8054App+ serie