Specifications - Nikon SB-400 Manual De Instrucciones

Reference information

Specifications

Electronic
En
construction
Guide number
(20ºC/68ºF)
Angle of coverage
Flash shooting
distance range
Flash mode
Compatible
cameras
Flash exposure
control set on the
camera
Bounce capability
ON/OFF switch
Warning
• Batteries should not be exposed to excessive heat such as strong sunshine, a
fire, or the like.
• Dry batteries should never be recharged in a battery charger.
• Do not expose the SB-400 to water as this may result in an electric shock or
cause the unit to catch on fire.
22
Automatic Insulated Gate Bipolar Transistor (IGBT) and series
circuitry
30/98.4 (ISO 200, m/ft), 21/69 (ISO 100, m/ft)
Light distribution covers an 18mm lens when mounted on a
Nikon DX format camera, and a 27mm lens when mounted on
an F6
0.6m to 20m (2 to 66 ft.) (varies depending on the ISO
sensitivity, angle of the flash head, and lens aperture in use)
i-TTL, M (manual, only with the D40-Series)
All cameras compatible with CLS
Slow-sync, Red-eye reduction, Red-eye reduction in slow-sync,
Rear-curtain sync flash, FV Lock flash, manual flash
Flash head tilts up to 90º with click-stops at 0º, 60º, 75º, 90º
Turn the SB-400 on and off using the ON/OFF switch