Mode selection
Selection confirmation
Description
Wireless local control (Bluetooth
requires a smartphone or a tablet with the
Weekly scheduler (Bluetooth
This mode requires a smartphone or a tablet with the
Wire control: electric control - permanent (on-off or 3-modulating point) or pulse.
Positioning (learning mode) : this mode is needed for storing limit positions of the actuator.
Positioning : allows the control of the actuator with a 0-10V or 4-20mA setpoint signal.
Functioning mode selection
The « Next Mode » button scrolls the functionning modes in the following order:
When the mode is selected, press « OK Mode » to confirm.
28
®
) : allows the use of the actuator from 20m maximum (in open field). This mode
X
®
software.
A
MART
®
) : thanks to AXMART
®
, you can assign up to 20 repeatable tasks to each actuator.
X
A
MART
Bluetooth
(local control)
®
↓
Bluetooth
®
(schedule)
↓
Wire control
↓
Learning mode (positioning)
↓
positioning
Local control (Bluetooth
Weekly scheduler (Bluetooth
Wired (permanent & pulse signal)
Positioning (learning mode)
Positioning
Keyboard local control
®
software.
)
®
®
)
(available soon)