KTM Power Parts 64112964044 Manual Del Usuario página 13

Assembling
- Position cover, guiding the headlight plug-in connector through the
opening in the process.
- Hold turn signal in the area
direction of travel, while pressing the cover tight at the same time.
The cover engages with an audible click.
- Repeat the operation on the opposite side.
- Mount screws and tighten to 5 Nm.
- Mount screws and tighten to 5 Nm.
- Mount screws and tighten to 2 Nm.
- Plug in socket connector
- Position the headlight mask.
- Mount adjusting screw .
- Mount screws and tighten to 2 Nm.
Final steps
- Check headlight setting (see owner's manual).
- Adjust headlight range of the headlight (see owner's manual).
and carefully press against the
.
13