12. Radio
12.1. Switching the radio on/off
Press the
button to switch the radio on/off.
You can receive analogue FM radio with this device. Adjust the aerial to get optimal
FM reception.
When the device is switched on, press the
select the operating mode. Select FM MODE for analogue radio and DAB
MODE for digital radio.
12.2. Radio operation in FM mode
In analogue radio mode, the current station name and the stereo/mono setting (ST
or M) are shown in the display. If available, additional information regarding the
current station is provided underneath (radio text).
12.2.1. Setting/searching for stations
Press the TUN- or TUN+ button to set a station manually.
Press and hold the TUN- or TUN+ button to search for stations. The search
stops automatically at the next station found.
12.2.2. Stereo/mono
If a radio signal is not sufficient, you can improve the reception, if necessary, by
switching the radio station to mono.
When the device is in use, press the ST button. If the device is in stereo mode, it
is then switched directly to mono mode. MONO M appears in the display.
Press the button again to switch back to stereo mode. STEREO ST appears in
the display.
12.3. Storing and selecting stations
The radio has 30 memory slots where you can save your favourite stations. To per-
form the functions described below, first switch on the radio.
12.3.1. Automatic storage
Press and hold the AMS button until the station search starts automatically. All
stations found are stored successively.
166
/ MODE button several times to