7.1. Adjusting the aerial
The device is fitted with a telescopic aerial for the radio reception. Pull this out com-
pletely and arrange it for optimum reception.
7.2. Mains connection
Connect the mains adapter.
To do this, place the connection cable plug in the socket
DC IN 5.9 V
230V ~ 50 Hz earthed power socket which is accessible at all times.
8. Volume
Turn the control knob on the side of the device -/+ to set the volume. The cur-
rent volume is shown in the display.
9. Lighting
Pressing the LIGHT button switches the integrated lighting on the underside of
the device on or off.
This light is only designed for the presentation of food-
stuffs and not for room lighting.
10. Setting the date/time
The device is equipped with the Radio Data System that sets the time automatically.
Once the device is connected to the mains, the correct time and date are synchro-
nised.
In some cases, the time cannot be set if the radio signal is too weak. In this case,
00:00 is shown on the display and the time must be set manually.
1.5 A and the mains adapter into a properly installed
DE
FR
NL
IT
ES
EN
163