BALDR B0389WST2H2-V1 Manual De Usuario página 14

Humidity
1. After power on ,the indoor humidity will display automatically, it will
update reading each 30 seconds and start to receive outdoor signal
which lasts for max 3 minutes.
2. Humidity display range: 1%-99%;for humidity lower than 1%,the
reading will be "1%";for humidity higher than 99%, the reading will
be "99%".
3. Accuracy: For humidity between 40%-80%, the accuracy is ±5%, if
out of this range the accuracy will be ±8%.
4. Arrow indication for humidity changes:
will display when the reading increase by 3% RH within one hour
or compared with last reading.
will display when the reading decrease by 3% RH within one hour
or compared with last reading.
5.Humidity resolution:1% .
Remark: The reading will be more accurate standing still for half an hour
after power on
COMFORT LEVEL INDICATOR
DISPLAY
HUMIDITY
TEMPERATURE
RF RE-REGISTRATION
Press and hold the "
receiving signal again.
TEMPERATURE ALERT FUNCTION
SET OUTDOOR TEMPERATURE ALERT
1.In alert checking mode, press and hold "
outdoor temperature alert value ; the setting data will be flashing in
1Hz.
DRY
1%- 39%
NA
" button to clear all sensors data and start
/CH
14
COMFORT
40%-70%
20℃-28℃
" button to enter into
ALARM
WET
71%-99%
NA