BALDR B0389WST2H2-V1 Manual De Usuario página 18

Inaccurate
temperature/
humidity
"HH/LL" display in
indoor and/or
outdoor
temperature
If your BALDR product does not operate properly after trying the
troubleshooting steps, contact the seller on your order page or
shoot an email to: service@baldr.com.
BALDR sensors are sensitive to surrounding environmental
conditions. Proper placement of both the main unit and outdoor
sensor are critical to the accuracy and performance of this
product.
Main Unit Placement
Place main unit in a dry area free of dirt and dust. To help ensure an
accurate indoor temperature measurement, be sure to place the Main
unit away from heat sources or vents.
feet (0.9 m) away from electronics that may
interfere with the wireless communication
(such as TVs, microwaves, computers, etc).
• Use standard alkaline batteries. Do not use
heavy duty or rechargeable batteries. NOTE:
It may take a few minutes for main unit and
sensor to synchronize after batteries are
reloaded.
Make sure both the main unit and sensor are
placed out of direct sunlight and away from
any heat sources or vents.
If the temperature is higher than the detection
range, HH will display on screen for indication;
if lower than the detection range, LL will
display on screen for indication.
PLACEMENT INSTRUCTION
18