BALDR B0389WST2H2-V1 Manual De Usuario página 17

● About Main Unit: The AAA battery is only for power supply. When
battery indicator shows next to your indoor temperature, replace
battery.
Problem
Outdoor reading is
flashing or showing
dashes
No outdoor sensor
reception
TROUBLE SHOOTING
Possible Solution
Flashing of the outdoor reading is generally an
indication of wireless interference.
1. Bring both the sensor and display indoors,
side by side and remove batteries from
each.
2. Make sure the 1-2-3 switch on both units
match.
3. Reload batteries in main unit.
4. Reload batteries in outdoor sensor.
5. Let both units sit within a couple feet of each
other for a few minutes to gain a strong
connection before taking sensor to outdoor
area.
• Reload the batteries of both outdoor sensor
and main unit. Please refer to the SENSOR
SETUP section.
• Relocate the main unit and/or the outdoor
sensor. The units must be within 328 ft (100
m) of each other.
• Make sure both units are placed at least 3
17