Atos PROVOX TruTone EMOTE Instrucciones De Uso página 3

TruTone EMOTE® Electrolarynx Instructions
Note: This electrolarynx is designed to increase intelligibility by giving you
the option to add prosody (i.e. NOT be monotone). Please read all instructions
to learn all of the features, especially Sections 4 & 11.
1. TruTone EMOTE
A – Sound Head (x2)
B – Sound Head Spacer
C – Power Button & Pressure Sensor
D – Volume Knob
E – Body
F – Battery
G – Battery Cap
H – Battery Connector
I – Oral Tube (2 + 2)
J – Oral Adapter
K – Tone (Pitch) Adjustment Knob
LED – LED Indicator Light
M – MODE Button
U – USB Dust Cover
V – USB Charge Jack
2. When Your Electrolarynx Arrives
1. Adjust the Base-Tone and Mode (Section 4)
2. Choose your Sound-Head (Section 5)
3. Decide if the Sound-Head spacer is used (Section 5b)
4. Set the MODE (Section 6)
5. Charge your battery the first night you receive it, once a week (Section 7)
6. General Care/Troubleshooting (Section 8)
7. See tips on using an electrolarynx in Sections 9-10
8. Use the EMOTION™ Button to be more intelligible! (Section 11)
9. Get more out of your TruTone EMOTE (Section 12)
10. If you prefer a monotone voice, you can use the button to control your volume
(Section 6)
11. Warranty & Warnings are on the last page.
3. Volume Level
Set the volume by turning the Volume Knob (D). Do not force the knob. Turn UP
towards the Sound-Head Cap for a higher volume. Turn DOWN towards the battery
cap to reduce.
All the way DOWN is OFF, which is handy when you do not want to accidentally
activate the device.
4. Adjusting Tone
• The Tone Adjustment Knob (K) is located to the left of the Power Button.
• Turn UP towards the Sound-Head Cap for a higher tone.
• Turn DOWN towards the Battery Cap for a lower tone.
• A TIP: Hold the power button down while you make your initial adjustment.
5. Sound-Head
5a. Optional Extra Sharp Sound-Head Cap – (With the gray Sound-Button) If you
have hard neck tissue, the Sharp Sound-Head Cap has a sharper sound, which may
penetrate tissue better. This may also be helpful if you work in a loud environment.
This cap is not as smooth sounding, so the voice may not be as pleasant.
5b. Sound-Head Spacer
• If you regularly use a higher tone, you may remove the Sound-Head Spacer (B);
Unscrew the Sound-Head Cap, remove the Spacer, and screw the Cap back on.
ENGLISH
Electrolarynx
®
M
LED
V
U
H
MODE
F
A
B
LED
U
K
D
C
E
G
I
J
3