People's lives depend on your safe installation of our products. It is important to follow
all instructions shipped with the products. This device is to be installed by qualified personnel
who are trained in pipefitting and electrical wiring, and are familiar with national as well as local
codes.
The selection of the mounting location for the device, its controls and routing of the pipe
is to be accomplished under the direction of the facilities engineer and the safety engineer. In
addition, listed below are some other important safety instructions and precautions you should
follow:
•
Read and understand all instructions before installing or operating this
equipment.
•
Optimum sound distribution will be severely reduced if any objects are in
front of the horn. You should ensure that the front of the horn is clear of any
obstructions.
•
All effective warning horns produce loud sounds which may cause, in certain
situations, permanent hearing loss. You should take appropriate precautions
such as wearing hearing protection when testing the horn.
•
After installation, ensure that all bolts and threaded joints have been tightened.
•
Establish a procedure to routinely check the sound system for proper
activation and operation.
•
Provide a copy of these instructions to the safety Engineer, operator(s), and
maintenance personnel.
•
File these instructions in a safe place and refer to them when maintaining and/
or reinstalling the device.
•
Failure to follow all safety precautions and instructions may result in property
damage, serious injury, or death.
INSTALLATION INSTRUCTIONS
FOR
3H AND 6H AIR HORNS
SAFETY MESSAGE TO INSTALLERS
-1-