Storing A Redial Number; Inserting A Pause In The Dialing Sequence; Reviewing , Changing Or Deleting Stored Names /Numbers - GE 27958 Guia Del Usuario

S R N
TORING A EDIAL UMBER
1. Make sure the phone is OFF (not in TALK mode).
2. Press the memory button on the handset or base.
3. Press any number key (0-9) to store the phone number in that memory location.
4. Press memory and ENTER NAME shows in the display.
5. Use the base or cordless handset touch-tone pad to enter the name,
then press memory. ENTER NUMBR shows in the display.
6. Press redial to display the redial number and name.
7. Press memory again to confirm.
NOTE : If the number you want to redial has more than 24 digits, the
telephone number cannot be stored in memory.
I P
NSERTING A AUSE IN THE
Press the #PAUSE button on the touch-tone pad twice to insert a delay in
the dialing sequence of a stored telephone number when a pause is
needed to wait for a dial tone (for example, after you dial 9 for an outside
line, or wait for a computer access tone.) Each pause counts as 1 digit in
the dialing sequence.
R , C
EVIEWING HANGING OR
To Review: Press memory on the handset or base, then press the
MESSAGES/CID ( or
(cordless handset) to scroll through the stored numbers. Or press the
memory location number.
To Change: Follow the steps under Storing a Name and Number in
Memory except replace the stored name or number with the new
information.
To Delete: Press memory on the handset or base, then press the
MESSAGES/CID ( or
(cordless handset) to scroll to a desired memory.
24
All manuals and user guides at all-guides.com
D S
IALING EQUENCE
D S N
ELETING TORED
) button (base) or the cid/vol (
) button (base) or the cid/vol (
/N
AMES UMBERS
or ) button
or ) button