Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
Push eighteen HIDDEN CAMS (1F) into the
å
ENDS (A2 and B2), BOTTOM (D), and BACK (E). Then,
insert the metal end of a CAM DOWEL (2F) into each
HIDDEN CAM, except in the long edge of the ENDS.
Arrow
2F
(12 used)
(18 used)
Do not insert CAM
DOWELS into this edge.
Arrow
Hole
The arrow in the HIDDEN CAM
must point toward the hole in
the edge of the board.
Page 6
Do not tighten the HIDDEN CAMS in this step.
1F
D
Arrow
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
Scan this QR code or go to this address:
http://qr.sauder.com/?ID=866
to watch a video on how to assemble your unit.
E
A2
1F
409044
Do not insert CAM
DOWELS into this edge.
B2
Arrow
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
www.sauder.com/services
Publicidad
