ABB D1 Manual De Instrucciones página 12

Set day
Select the day or group of days in which the program must be executed.
Set TiME/ON
EN
Set TiME/OFF
10
1. Set the day or group of days using keys
»
The flashing arrow indicates the day or group of
days selected.
P 0 2
2. Press
»
Followed by TIME/ON setting.
1. Set program start time using keys
hh/mm.
i
Single pressure of keys moves field by minutes.
P 0 2
Prolonged pressure of keys moves field by hours
2. Press
»
The seconds field appears.
3. Set the seconds using keys
P 0 2
4. Press
» The program start time has been set
»
Followed by TIME/OFF setting.
1. Set program end time using keys
i
Repeat operations as per TIME/ON.
2. Press
P 0 2
»
The program end time has been set
3. Press
P 0 2
OK to confirm.
OK to confirm.
OK to confirm.
OK to confirm.
OK to confirm program end time.
.
in the format
.
.