Hour Meter; Back-Lighting; Warranty - ABB D1 Manual De Instrucciones

3-8-5 Hour meter

This enables the number of hours of the channels in the ON status to be displayed.

3-8-6 Back-lighting

This enables the display backlighting time to be set.

3-8-7 Warranty

This enables the time since the putting into service of the clock to be displayed
in days.
1. Select the "HOURMETER" sub-menu using keys
OK to confirm.
2. Press
3. Select channel using keys
» The display shows the hours of operation.
i
Press keys
1. Select the "BACKLIGHT" sub-menu using keys
OK to confirm.
2. Press
3. Select using keys
FIXED OFF or TEMP 6SEC.
OK to confirm.
4. Press
1. Select the "WARRANTY" sub-menu using keys
OK to confirm.
2. Press
»
The display shows the time, as described above.
i
Counter may not be zeroed.
.
+ to zero.
between: FIXED ON,
.
.
EN
.
21