Charging Your Headset; Turning Headset On & Off - Motorola ENDEAVOR HX1 Guia De Inicio Rapido

English

Charging your headset

See figure 5 on page 4.
Charge your headset before using it.
While charging, the battery indicator light is red. It turns green when the
battery is fully charged.
Note: Headset is not functional while charging.
Turning headset on & off
Slide the Power switch to the ON position (no red is shown under the switch).
The indicator light flashes blue three times, then flashes in blue and purple (if
connected with a device) or is steadily blue (if ready to be paired).
Slide the Power switch to the OFF position (red is shown under switch). The
indicator light flashes three times then turns off.
Pairing & connecting your headset
Initial pairing & connection
Once charged, let's get your headset paired and connected to your Bluetooth
phone(s).
1. Turn off any Bluetooth devices previously paired with your headset.
2. Turn on the Bluetooth feature on your phone.
3. Put headset on your ear and turn it on. The indicator light becomes
steadily lit in blue.
8