Wearing Your Headset - Motorola ENDEAVOR HX1 Guia De Inicio Rapido

English
IMPORTANT
Depending on the country in which you purchased your HX1 headset,
English language Voice Prompts may be defaulted ON or OFF. If the Voice
Prompts are ON, you will hear a voice when turning on the headset and
when using it.
If you wish to change the voice prompt default setting:
With the headset turned on, press and hold either Volume button and Call
button until you hear "voice prompts on" or "voice prompts off".
Note: Voice prompts are supported in English only.

Wearing your headset

Choose an ear fitting
See figures 2 & 3 on page 2.
Your headset comes with both loop- and spring-type ear fittings.
• Left ear spring
• Right ear spring
• Medium ear loop
• Small ear loop
To get the best headset performance and a good fit, try out all the supplied
ear fittings.
To change from loop-type fitting to spring-type fitting:
1. Lift loop up and slide it off the headset in an upward direction
2. Slide new fitting downward onto earpiece, then align and push bottom
into groove
3. Position ear hook for left or right ear
6