Getting Started; Stand Assembly; Height Adjustment - Vornado ENERGY SMART 693DC Guia Del Propietario

GETTING STARTED

Hex wrench required (Included):

STAND ASSEMBLY

1. Attach Head Assembly
(A) to Extension (B) with
hardware provided (D).
2. Attach Extension (B) to
Base (C) with hardware
provided (D).

HEIGHT ADJUSTMENT

Add extension (B) for full
height product. Remove
extension (B) for smaller
height.
4
English
D
Hardware
A
B
POWER SUPPLY
Model 693DC 24V DC/1.5 AMP
Model 783DC 24V DC/2.5 AMP
C
1. Insert DC power cord plug
into port located on the
underside of the motor.
2. Connect the AC power
cord to the power supply.
3. Plug the power cord into
a power outlet.
Note: The external
power supply may
become slightly warm
to the touch during
normal operation.