Getting Started - Vornado 5303DC Guia Del Propietario

DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY
EXPLODE OR LEAK. New and used batteries may
cause injury. Keep new and used cells (or batteries)
away from children.
PACKAGE RECYCLING: The packaging
protects the appliance from transport damage.
The packaging materials are selected from
the point of view of their environmental
friendliness and disposal technology and are
therefore recyclable.
Dispose of all packaging materials in an
environmentally responsible manner.
SAVE THESE INSTRUCTIONS
6
English

GETTING STARTED

Installing Circulator Head (Model 6803DC Only)
No tools required!
1. Gently place the circulator head face down on the ground on a
soft cloth to avoid scratches or damages to the unit. Insert power
cord into the top of pole (A) and pull through the bottom (B). Align
the Lock Release Button (C) on circulator head with the hole (D)
located on the pole. Push the pole onto the circulator head until
the Lock Release Button snaps into place.
B
Lock Release
Button
A
Stand Assembly (Model 6803DC Only)
1. The upper pole and lower pole are pre-assembled, with the
fastening nut (E) secured on the underside of the base. Rotate
fastening nut counter- clockwise to remove.
2. The legs are designed to fit into the grooves (F) on the underside
of the base cap. Assemble all the legs onto the pole, then
replace fastening nut by rotating clockwise to secure all the legs
in place.
F
E
7
English