Safety Symbols - koban KMD-15 Instrucciones Operativas

KMD-15
DIGITAL MULTIMETER
5. ALWAYS discharge filter capacitors in power supplies
and disconnect the power when making resistance or
diode tests.
6. ALWAYS turn off the power and disconnect the test
leads before opening the doors to replace the fuse or
batteries.
7. NEVER operate the meter unless the back cover and
the battery and fuse doors are in place and fastened
securely.

SAFETY SYMBOLS

WARNING
CAUTION
4
This symbol adjacent to another symbol,
terminal or operating device indicates that
the operator must refer to an explanation
in the Operating Instructions to avoid
personal injury or damage to the meter.
This
WARNING
potentially hazardous situation, which if
not avoided, could result in death or
serious injury.
This
CAUTION
potentially hazardous situation, which if
not avoided, may result damage to the
product.
symbol indicates
symbol indicates
www.grupotemper.com
a
a