Safety Instructions - koban KMD-15 Instrucciones Operativas

SAFETY INSTRUCTIONS

This meter has been designed for safe use, but must be
operated with caution. The rules listed below must be
carefully followed for safe operation.
1. NEVER apply voltage or current to the meter that
exceeds the specified maximum:
Function
VAC
V DC or V
AC
mA DC
A DC
Resistance,
Continuity
2. USE EXTREME CAUTION when working with high
voltages.
3. DO NOT measure voltage if the voltage on the "COM"
input jack exceeds 500V above earth ground.
4. NEVER connect the meter leads across a voltage
source while the function switch is in the current,
resistance, or diode mode. Doing so can damage the
meter.
www.grupotemper.com
Input Limits
Maximum Input
600V DC/AC
600V DC/AC, 200Vrms on 200mV range
200mA 250V fast acting fuse
10A 250V fast acting fuse
(30 seconds max every 15 minutes)
250Vrms for 15sec max
KMD-15
DIGITAL MULTIMETER
3