Kohler Elate 707618-8G79-BL Manual De Instrucciones página 12

8. Position the Header
CAUTION: Risk of product damage. The header may fall if not properly positioned onto the wall brackets. Make
sure that the top of the header is properly hooked onto the brackets.
Slide a bumper into each end of the header, as shown.
From inside the shower, raise the header above the wall brackets.
Tilt the header and lower it onto the wall brackets, as shown.
Make sure that the top of the header is properly hooked onto the brackets, as shown.
Rotate the header in place, flat against the wall brackets.
1460483-2-B
12 Kohler Co.