Kohler Elate 707618-8G79-BL Manual De Instrucciones página 13

9. Secure the Header
CAUTION: Risk of personal injury. Position hands away from the drilling locations when drilling through the
header.
CAUTION: Risk of product damage. When securing the header to each wall bracket, do not drill through the
second wall of the header.
From inside the shower, drill a 9/64" hole through the first wall of the header using the wall bracket as a template.
Repeat for the other side.
Secure the header to each wall bracket using a #8-18 x 3/8" self-drilling screw (provided).
Thoroughly clean the header. Make sure there is no debris in the roller tracks.
Slide each bumper flush against the wall until clicked onto the bracket.
Kohler Co.
8-18 x 3/8"
13
1460483-2-B