Kohler Elate 707618-8G79-BL Manual De Instrucciones página 5

1. Confirm Ledge and Wall Compatibility
IMPORTANT! For proper door alignment and operation, confirm that the shower base/bath ledge and walls meet the
following requirements. Do not install the door if these requirements are not met.
There must be at least 2-7/8" (73 mm) of flat surface on the shower base/bath walls.
There must be at least 2-1/4" (57 mm) of flat surface on the shower base/bath ledge.
Walls must be within 3/8" (10 mm) of plumb.
The shower base/bath ledge must be level between the walls.
The radius of the shower base/bath ledge where it meets the wall must be 1/2" (13 mm) or less.
Kohler Co.
2-1/4"
(57 mm)
Min
2-7/8"
(73 mm)
Min
5
1/2" (13 mm)
Max Radius
1460483-2-B