Kohler Elate 707618-8G79-BL Manual De Instrucciones página 22

18. Install the Remaining Seals
Align the top of the cover with the top of the wall seal and press together.
Remove the adhesive backing from the sliding panel wall seal.
NOTE: The fin on the L-shaped wall seal should face the interior of the shower.
Starting from the bottom, rest the sliding panel wall seal on the bottom bumper and press against the wall.
Verify that the wall seal is level and plumb.
NOTE: The sliding panel seal should sit above the bottom bumper and below the top bumper when the sliding panel is
closed.
Press the sliding panel seal onto the end of the sliding panel glass closest to the showerhead.
1460483-2-B
Fin
22 Kohler Co.