Connect The Water Supplies; Install The Sidesprays - Kohler K-498 Guia De Instalacion

Connect the Water Supplies

Apply
thread
sealant.
Hot
Supply
7. Connect the Water Supplies
Remove the covers or caps from the supply lines.
Apply thread sealant to the male adapters.
Insert a washer into each of the tower supply hoses.
IMPORTANT! Ensure that the hot and cold supply hoses are connected to the appropriate water supply
lines.
Thread the tower supply hoses onto the water supply adapters and securely wrench tighten.

8. Install the Sidesprays

Install the screen into the supply tube as shown.
Slide the sidespray onto the supply tube.
Tighten the setscrew to secure the sidespray to the supply tube.
1010418-2-D
Tower Supply
Hoses
Washers
Cold
Supply
Male
Adapter
Supply
Tube
10
Install the Sidesprays
Screen
Setscrew
Sidespray
Kohler Co.