Special Function Buttons - LG WM3360HVCA Manual Del Propietário

H ow to use washer
Your Steam Washer™ features several additional
cycle options to customize cycles to meet your
individual needs. Certain option buttons also feature
a special function (see the following page for details)
that can be activated by pressing and holding that
option button for 3 seconds.
To Add Cycle Options to a Cycle:
❶ Turn on the washer and turn the cycle selector
knob to select the desired cycle.
❷ Use the cycle setting buttons to adjust the
settings for that cycle.
❸ Press the cycle option button(s) for the option
you would like to add. The cycle option buttons
will light when selected.
❹ Press the START/PAUSE button to start the
cycle. The washer will start automatically.
NOTE: To protect your garments, not every
wash/rinse temperature, spin speed, soil level, or
option is available with every cycle. See the Cycle
Guide for details.
STEAM
Use the STEAM button to add steam to
the cycle for extra cleaning power and
improved efficiency. See Steam Cycles
section for additional details.
NOTE: The steam option cannot be
used with all cycles.
DELAY WASH
Once you have selected the
cycle and other settings, press
this button to delay the start of
the wash cycle. Each press of the button increases
the delay time by one hour, up to 19 hours.

SPECIAL FUNCTION BUTTONS

STAIN CARE
Use this option for heavily
soiled loads that need improved
stain treatment. When STAIN
CARE is selected, the water temperature for the
selected cycle will begin as warm water to help
prevent the setting of certain types of stains. Then
as the cycle progresses, the water will be heated
to higher temperatures to help remove stains that
require treatment at higher temperatures. This
option is designed for optimum stain removal.
NOTE: If STAIN CARE is selected with the
SANITARY cycle, the cycle will begin with very hot
water since that is default for that cycle and cannot
be changed.
COLDWASH TM
Use this function to save energy by using
cold water while ensuring proper
washing. For high wash efficiency, it is
recommended to use less than 8 pounds.
FRESH CARE
Use this function when you are
not able to unload your clothes,
soon after the wash cycle ends.
This function provides periodic tumbling for up to
about 8 hours to prevent wrinkle. If you press the
START/PAUSE or ON/OFF button, you can unload
your laundry at anytime.
EXTRA RINSE
This option will add an extra rinse
cycle to the selected cycle. Use
this option to help ensure the
removal of detergent or bleach residue from fabrics.
19