Coldwash™ Cycles; Cycle Setting Buttons - LG WM3360HVCA Manual Del Propietário

H ow to use washer
COLDWASH™ CYCLES
COLDWASH™ cycles include the
COTTON/NORMAL, PERM. PRESS,
BULKY/LARGE, HEAVY DUTY,
DELICATES, HAND WASH/WOOL
and SPEED WASH cycles.
Adding the COLDWASH™ option to these cycles
provides reduce energy usage and same washing
performance as warm wash. By using 6 different
washing motion (Tumbling, Rolling, Stepping,
Scrubbing, Swing, Filtration), fabrics get the cleaning
benefits, without the energy usage.
To Add COLDWASH™ to a Standard Cycle:
❶ Turn on the washer and turn the cycle selector
knob to select a cycle with the COLDWASH™
option.
❷ Press the COLDWASH™ button. The washer will
automatically adjust the cycle settings.
❸ Set any other desired options.
❹ Press the START/PAUSE button to start the cycle.
The washer will start automatically.
IMPORTANT NOTES ABOUT COLDWASH™
CYCLES:
• When you select the COLDWASH™ option, wash
time will be increased up to 10 minutes.
• For high wash efficiency, it is recommended to use
less than 8 pounds.

CYCLE SETTING BUTTONS

Each cycle has preset settings that are selected
automatically. You may also customize the settings
using the cycle setting buttons. Press the button for
that option to view and select other settings.
The washer automatically adjusts the water level for
the type and size of wash load for best results and
maximum efficiency. It may seem there is no water
inside the drum in some cycles, but this is normal.
NOTE: To protect your garments, not every
wash/rinse temperature, spin speed, soil level, or
option is available with every cycle. See the Cycle
Guide for details.
18
WASH/RINSE
Selects the wash and rinse temperature
combination for the selected cycle. Press
the WASH/RINSE button repeatedly to
scroll through available settings.
• Your washer features a heating element to boost
,
the hot water temperature for Extra Hot settings.
This provides improved wash performance at
normal water heater settings.
• Select the water temperature suitable for the type
of load you are washing. Follow the fabric care
label for best results.
• Warm rinses leave the loads drier than cold rinses.
Warm rinses can increase wrinkling.
• In cold climates, a warm rinse makes the load
more comfortable to handle.
• Cold rinses use less energy.
SOIL LEVEL
Adjusts the selected cycle to allow more
time for heavily soiled clothes or less
time for lightly soiled clothes.
SPIN SPEED
The washer drum spins at up to 1,200
RPM. This reduces drying time and
saves energy.
Press the SPIN SPEED button to select
the maximum spin speed. Some fabrics, such as
delicates, require a slower spin speed.
The Drain & Spin cycle:
The Spin Speed button also activates the Drain &
Spin cycle to drain the tub and spin clothes; for
example, if you want to remove clothes before the
cycle has ended.
To activate the DRAIN & SPIN cycle:
❶ Press the ON/OFF button to turn on the washer.
❷ Press the SPIN SPEED button.
❸ Select the desired spin speed.
NOTE: If NO SPIN is selected, the washer will
drain only.
❹ Press the START/PAUSE button.
SIGNAL
Adjusts the volume of the end-of-cycle
SIGNAL, or turns it off.