Maintenance And Servicing - Lavor GV Vesuvio Instrucciones Para El Uso

EN
the machine.
- To move the machine inside the industrial area,
always use the special handle.
Never use the power cable or the gun cable to
move it.
- Never direct the steam gun towards people
and objects made of plastic, crystal or other
delicate materials that may melt or deteriorate
at 180°C.
- Never leave the machine unattended.
- Always de-energise the machine before filling
the tanks.
- The machine cannot work if distilled water is
used to fill the tank
MAINTENANCE AND
SERVICING
Precautions for the machine maintenance
Before any maintenance activity, it is necessary to:
- De-energise the machine
- Apply a panel warning that the machine main-
tenance is underway.
Maintenance interventions
see: "ROUTINE MAINTENANCE TABLE"
WARNINGS
A good maintenance is a determining factor
OPERATION
Boiler steam blow-off
Boiler cleaning (disassemble the resistors
and remove the limestone)
Visual control
Internal cleaning
General cleaning
- Before any maintenance or replacement
- stop the machine (MAIN SWITCH turned to
- unplug it.
- Only skilled operators, familiar with the
Machine visual inspection
In order to assure a correct functioning and prevent
troubles, periodical visual inspections of the machi-
ne and its moving parts are recommended.
Such inspections must be carried out after de-ener-
gising the machine.
Particularly make sure that there are no anomalous
contacts between the elements and that the fixing
systems are not loosened.
Machine general cleaning
Once a week, remove all the dust from the machine
using compressed air.
Clean the machine body externally with suitable de-
tergents.
ROUTINE MAINTENANCE TABLE
MACHINE PART
-
-
Machinery + gun
------------------------------------------
Electric parts
Sealing of the water and steam
conductor + gun
-
-
24
for a longer life of the machine in the best
functioning and performance conditions in
order to assure the safety conditions provided
by the Builder.
activity, remember to:
OFF)
technology used on the machine must carry
out all the maintenance, replacement or
servicing activities described in this handbook.
PERIODICITY
Every day
Every year
Every week
Every mont
Every year
Every week