Ninka Qanto R1 Manual Del Usario página 2

General assembly instructions
!
WARNING
• Anyone who performs connection or assembly work on Qanto must
have access to these assembly instructions. Follow these instructions.
Non-observance of the abovementioned instructions can lead to acci-
dents resulting in severe personal injury.
• Assembly may be performed by expert personnel only.
clearance from the edge of the counter.
• If the product is visibly damaged, it must not be installed.
for the movement of the lifting system. When Qanto is extended upward
and to both sides, a clearance of about 7,87" (200 mm) to other cabinets
or shelving must be observed.
• A clearance of 11,82" (300 mm) must be observed between Qanto and a
gas stove.
• The electrical system of Qanto must be accessible (e.g., a double so-
cket under the cabinet near the base).
• Make sure the cables are undamaged.
• Before connecting the electrical drive to the in-house power mains,
on the type plate. The mains voltage and permissible input voltage must
be identical. If not, Qanto must not be connected.
• If the control unit causes unusual noises or odours during operation,
interrupt the power supply.
2
Qanto_Id_A4_00000.50.065050_US