Setting Up Your Phone - ZTE Cymbal LTE Conoce Tu Teléfono

Setting up your phone

Your phone already has a SIM card installed.
Step 1. Remove the back cover
Insert your fingernail into the slot at the bottom left of the back cover
and lift it up gently.
Optional: Insert the microSDHC card
If you have a microSDHC card, slide the microSDHC card into the
microSDHC card slot with the gold contacts facing down.
NOTE: The microSDHC card is sold separately.
Optional: Remove the micro-SIM card and/or the microSDHC card
Make sure the phone is powered off and the battery is removed.
Press down the soft block beside the card slots and slide out the micro-
SIM card or microSDHC card.
Step 2. Insert the battery
Insert the battery, making sure the gold contacts line up. Press down
gently to secure.
Step 3. Replace the back cover
Replace the cover over the back of the phone, and then press down
along the edges to secure.
Step 4. Charge the phone
Before turning on your phone, charge it fully.
Insert the small end of the USB cable into the phone.
Insert the larger end into the charger and plug it into an outlet.
WARNING: Only use approved chargers with your device. Incompatible
chargers or tampering with the charger port could damage your device
and void the warranty.
Step 5. Turning your phone on/off
To turn your phone on, press and hold the
Power/End key.
NOTE: The first time your turn on your phone you will need to activate it.
See the Activate your phone guide included with your phone.
To turn your phone off, press and hold the Power/End key and select
Power off.