Iso Ddin Radio Provision - Metra 99-7519B Instrucciones De Instalación

ISO DDIN radio provision

1 Cut the rib in the middle of the
Radio Housing to make room for
the ISO DDIN Brackets. (Figure A)
2. Attach the ISO DDIN Brackets onto
the Radio Housing. (Figure B)
3. Slide the radio between the ISO
DDIN Brackets and secure it using
the screws supplied with the radio.
(Figure C)
4. Snap the ISO DDIN Trim Plate into
the Radio Housing. (Figure C)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Test the
radio for proper operation.
6. Reassemble the dash in reverse
order of disassembly.
Kit Assembly
(Figure A)
99-7519B
(Figure B)
7
(Figure C)