Whittier Wood Products 747W Instrucciones Para Armar página 8

S
x 3
FIG. 10A
10. Attach the Foot (F) to the bottom side of the Bottom Shelf (B) gluing the Wood Dowels (U) into
the pre-drilled holes in the center of the Bottom Shelf (B). See FIGURE 10A. Secure the Foot (F)
to the Bottom Shelf (B) using Screw (S) through the Cleat (G). See FIGURE 10B.
Q
R
J
R
FIG. 11
11. Lay the Right and Left Front Legs (H & J) and Base (I) on a protected surface with the Rafix
Bolts (R) facing up. Attach the Left Front Leg (H) to the Base (I) by sliding the Rafix Bolt in the leg
into the Rafix Cam in the base. Make sure that the row of Rafix Bolts in the Base (I) are towards
the top edge of the base. Tighten the cams. See FIGURE 11. Repeat steps with the Right Front
Leg (J).
Page 8 — 747W
F
G
B
x2
R
Q
R
Stain Test Area
TOP
Top Edge of Base
R
R
I
S
G
FIG. 10B
R
Q
R
F
R
H
R
R