Whittier Wood Products 747W Instrucciones Para Armar página 6

T
x 4
Q
A
Q
A
B
T
T
FIG. 6
T
T
6. Attach a Vertical Divider (A) to the top side of the Bottom Shelf (B) gluing the Wood Dowels into
the pre-drilled holes in the Bottom Shelf (B). Make sure the Rafix Cams (Q) are facing out from
the unit. From the bottom side of the Bottom Shelf (B) use two Screws (T) in the remaining empty
holes, in line with the Vertical Dividers (A), to secure the piece together. See FIGURE 6. Repeat
steps for other Vertical Divider (A).
Q
C
x4
A
Q
A
B
Q
D
Q
R
Stain Test Area Q
FIG. 7
R
7. Attach Left Side (C) to Bottom Shelf (B) by sliding the Rafix Bolts (R) into the Rafix Cams (Q).
Tighten the cams. Repeat and attach the Right Side (D) to the Bottom Shelf (B). See FIGURE 7.
Page 6 — 747W