Lighted Housing Bulb Replacement; Operation Instructions - Harbor Breeze WO52BB5C Manual Del Usuario

LIGHTED HOUSING BULB REPLACEMENT

1.
CAUTION: Allow motor housing (L) and bulbs
(C) to cool before trying to access bulbs (C) in
lighted housing.
Locate four access covers in the bottom of the
motor housing (L). Determine which access cover(s)
will need to be removed to access burned out
bulb(s) (C). Remove two screws from each access
cover that will need to be removed. Remove each
burned out bulb (C) and replace with a
candelabra-base 7-watt max. bulb. (Fig. 1)
Replace access cover(s) with screws that were
removed.

OPERATION INSTRUCTIONS

1. The pull chain located on the switch housing has
four positions to control fan speed. One pull is
HIGH, two is MEDIUM, three is LOW and four
turns the fan OFF. (Fig. 1)
2.
The pull chain located in the center has four
positions to control the lights. One pull turns the
LOWER lights (light kit) on, two pulls turns the
UPPER lights (lighted housing) on, three pulls turns
ALL of the lights on, and four pulls turns ALL of the
lights OFF. (Fig. 2)
1
Access
Cover
1
2
14
L
Switch
Housing
C