Sauder 411660 Manual De Instrucciones página 13

Step 9
Carefully stand your unit upright.
å
Insert a PIVOT HINGE (15H) into a WASHER (9I) and into
å
the BOTTOM (F2).
Insert the PIVOT HINGE, which is fastened to the DOOR (I2),
å
into the hole in the VALANCE. You will need to tilt your
DOOR slightly.
Now, tip the DOOR in and fasten the free HINGE to the
å
DOOR. Use a BLACK 9/16" LARGE HEAD SCREW (1S).
Fasten a PULL (29K) to the DOOR (I2). Use two SILVER 7/8"
å
MACHINE SCREWS (42S).
NOTE: To make adjustments to the DOOR, loosen the
å
SCREW in the HINGE, make needed adjustments, and tighten
the SCREW.
Repeat this step for the other DOOR (I2).
å
42S
SILVER 7/8" MACHINE SCREW
(4 used for the PULLS)
29K
I2
(2 used)
(2 used)
www.sauder.com/service
1 ST
2 ND
15H
9I
BLACK 9/16" LARGE HEAD SCREW
(2 used for the PIVOT HINGES)
F2
1S
411660
Pro Tip: Lift with your
legs. And, you know,
your arms.
Page 13