Initial Operation - Winix Tower Q Manual Del Usuario

INITIAL OPERATION

① Insert the power cord into an electrical
outlet.
② Press the 'Power' button.
During the first 4 minutes of power up, the Air Quality
Note •
Indicator will flash as the Smart Sensor measure the air quality
in the environment, after which normal operation will begin.
③ By default, when the unit first powers
on, the mode will be set to Auto with
PlasmaWave enabled.
®
When in Auto mode, the fan speed will
•
be automatically adjusted according to
the environments air quality.
PlasmaWave ® works to remove harmful
•
airborne contaminants.
In Auto mode, as the indoor air quality improves, the fan
Note •
speed will automatically be reduced to Low.
When the unit is running, you may hear a chirping or buzzing
•
sound. The sound is from large particles passing through
PlasmaWave
failure. To disable PlasmaWave
English
® , it is normal and does not signify product
® , see page 13.
NK305 11