Initial Operation - Winix 2020EU Manual De Usuario

INITIAL OPERATION

① Insert the power cord into an electrical
outlet.
② Press the 'Power' button.
• D uring the first 30 seconds of power up, the Air Quality
Note
Indicator will cycle through Blue, Yellow and Red colors. The
Smart Sensors take approximately 4 minutes to gauge the air
quality in the environment, after which normal operation will
begin.
③ By default, when the unit first powers
on, the mode will be set to Auto with
PlasmaWave
• W hen in Auto mode, the fan speed will
be automatically adjusted according to
the environments air quality.
• P lasmaWave
airborne contaminants.
• I n Auto mode, as the indoor air quality improves, the fan
Note
speed will automatically be reduced to Low.
• W hen the unit is running, you may hear a chirping or buzzing
sound. The sound is from large particles passing through
PlasmaWave
failure. To disable PlasmaWave
English
®
enabled.
®
works to remove harmful
®
, it is normal and does not signify product
®
, see page 12.
2020EU 9