Initial Operation - Winix T1 Guía De Uso Y Cuidado

INITIAL OPERATION

Insert the unit plug into an electrical outlet.
①
Press the [Power] button
②
x A short animation and music will play to ensure it is powered on.
 During the first 4 minutes of power
up, the Smart Sensors measure the
air quality in the environment, after
which normal operation will begin,
preset in Auto Mode.
By default, when the unit first powers on, the mode will be set to Auto
③
with PlasmaWave® enabled.
x When in Auto Mode the fan speed will be automatically adjusted according to the
environments air quality.
x PlasmaWave® works to remove harmful airborne contaminants.
 In Auto mode, as the indoor air quality improves, the fan speed
will automatically be reduced to Low.
 When the unit is running, you may hear a chirpping or buzzing
sound. The sound is from large particles passing through
PlasmaWave®, it is normal and does not signify product failure. To
disable PlasmaWave®, see page 15.
English
Operating the air cleaner
| Operation
13
T1