Installing Flat Panel Screen To Wall Plate - PEERLESS PARAMOUNT PF660 Instalación Y Montaje

Mounting and Removing Flat Panel Screen
Hook adapter brackets (BB) onto wall plate (AA). Then slowly swing screen in as shown. Turn safety screws, using
3
allen wrench (EE) clockwise at least six times to prevent screen from being removed as shown in detail 1 of figure 3.1.
Screen can be adjusted horizontally if desired as shown in figure 3.2.
NOTE: To lock the screen down, tighten safety screws to wall plate as shown in detail 1.
To remove screen from mount, loosen safety screws, swing screen away from mount and lift screen off of mount.
WARNING
• Always use an assistant or mechanical lifting equip-
ment to safely lift and position the flat panel screen.
CAUTION
• Do not tighten screws with excessive force.
Overtightening can cause damage to mount. Tighten
screws to 40 in. • lb (4.5 N.M.) maximum torque.
AA
SAFETY
SCREWS
Visit Peerless website at www.peerlessmounts.com
BB
DETAIL 1
BB
AA
fig 3.1
8 of 24 ISSUED: 11-09-07 SHEET #: 202-9273-2 04-30-08
For customer care call 1-800-729-0307 or 708-865-8870
All other brand and product names are trademarks or registered trademarks of their respective owners.
fig 3.2
© 2007, Peerless Industries, Inc. All rights reserved.