Mounting And Removing Flat Panel Screen - PEERLESS Paramount PA760 Instalación Y Ensamblaje

Mounting and Removing Flat Panel Screen

WARNING
• Always use an assistant or mechanical lifting equipment
to safely lift and position the flat panel screen.
• Do not tighten screws with excessive force.
Overtightening can cause damage to mount. Tighten
screws to 40 in. • lb (4.5 N.M.) maximum torque.
• Be careful not to pinch fingers when pushing screen from
the bottom.
Hook adapter brackets (B) onto wall mount (A)
3
adapter plate. Then slowly swing screen in as
shown. Turn safety screw, using allen wrench (F),
clockwise at least six times to prevent screen from
being removed as shown in cross section of fig. 3.1.
To horizontally adjust screen, loosen safety screw
and slide screen along adapter plate to desired
position as shown in fig 3.2. Then tighten safety
screw.
NoTe: To lock the screen down, tighten safety
screws to adapter plate as shown in cross section of
fig 3.1. To remove screen from mount, loosen safety
screws, swing screen away from mount, and lift
screen off of mount.
fig 3.2
To adjust tilt, hold screen securely and loosen
4
tension knob. Push or pull from top or bottom of
screen to adjust tilt, then retighten tension knob. Tilt
can be adjusted to a maximum of 15° forward and
5° backward.
B
ADAPTER PLATE
wALL MOUNT (A)
ADAPTER PLATE
SAfeTy
B
SCREWS
fig 3.1
TeNSION KNOB
fig 4.1