English - HEINE OMEGA 600 Manual Del Usuario

HEINE OMEGA 600
HEINE OMEGA 600 wired
Please read and follow these instructions for use and keep
them for future reference.
Intended use
The HEINE OMEGA 600 and HEINE OMEGA 600 wired binocular
indirect ophthalmoscope is a head worn AC-powered or battery
powered device for transient use, containing illumination and viewing
optics intended to examine posterior segments of the eyes.
The product must only be used by qualified medical professionals
and in medical healthcare facilities.
For U.S. only:
Federal law restricts this device to sale by or on the order
of a Physician or Practitioner.
Warnings and safety information
CAUTION! This symbol indicates potential hazardous situations.
Ignoring the corresponding instructions may lead to dangerous
situations of mild to moderate extent. (Background color yellow;
foreground color black).
NOTE! This symbol indicates valuable advice. Notes are
important, but not related to hazardous situations.
Product overview
OMEGA 600
Fig. 1
3
1
10
7
9
8
OMEGA 600 wired
Fig. 2
3
12
11
4
Optics unit for OMEGA 600 and OMEGA 600 wired
Fig. 3
18
15 17 16
Rechargeable battery CB1
Fig. 4
2
3
3
6
4
2
3
3
5
6
14
15
19 17 19
10
1 Width adjustment
2 Height adjustment
3 Padding
4 Socket for brightness control
5 Adjustment lever
6 Brightness control
7 Charge status indicator
8 Battery compartment
9 USB-C socket
10 Rechargeable battery CB1
11 Power indicator
12 Power supply connection
13 Optics unit
14 Aperture selection lever
15 Illumination height adjustment
16 Dust cover
17 Stereoscopic adjustment lever
18 Filter selection lever
19 Eyepieces
Setting up
To put the OMEGA 600 into operation, insert the CB1 battery (10)
into the instrument's battery compartment (8) by quickly pressing it
in so that it audibly clicks into place. We recommend to charge the
battery CB1 (10) of the device fully before first use.
To put the OMEGA 600 wired into operation, connect the power
supply unit to a mains plug using the appropriate country-specific
primary adapter. Fig. 5 and Fig. 6 describe the approach for
changing the plug.
5
4
EU
Fig. 5
Fig. 6
Connect the power supply unit to the mains after checking the
mains voltage indicated on the identification plate.
Mount the power supply in such a position where it can be easily
unplugged. The LED indicates the operational readiness of the power
supply. The power indicator (11) is automatically activated when the
device is switched on.
To put the power supply out of operation just disconnect the power
supply from the mains supply.
Do not pull the cable to disconnect the power adapter from the
mains.
18
Charging of the OMEGA 600
Charge the device outside of the patient environment (at least
1.5 metres from the patient or patient support pursuant to IEC
60601-1, see Fig. 7).
15
Fig. 7
MED 234766 2021-03-26
USA /Japan UK

ENGLISH

Australia
7/52