Epson SC-F10000 Serie Guía De Inicio página 3

Notes on Handling
!
Do not use the printer in locations with volatile substances such as alcohol or thinner, or near
naked flames.
An electric shock or fire could occur.
Do not use the printer if it is giving off smoke or if you notice any abnormal odors or noises.
An electric shock or fire could occur. If any abnormalities occur, turn off the power and unplug the
power cable immediately, and then contact your dealer or Epson Support.
Never try to repair the printer yourself as this is extremely dangerous.
Do not use the printer in an environment where flammable gas or explosive gas may exist. Do
not use sprays that contain flammable gas inside or near the product.
A fire could occur.
Only route the cables as indicated in the manual.
A fire could occur. This could also cause damage to connected devices.
Do not insert or drop any metallic or flammable items into the openings on the printer.
An electric shock or fire could occur.
Do not touch any areas inside the printer except for those indicated in the manual.
An electric shock or burn could occur.
Do not disassemble anything except when indicated to do so in the manual.
If the LCD for the control panel is damaged, be careful of any leaking liquid crystal.
Provide first aid under any of the following conditions.
❏ If liquid adheres to your skin, immediately wipe it off and then wash the area using large
volumes of soapy water.
❏ If any liquid gets in your eyes, flush them with clean water for at least 15 minutes, and consult a
physician immediately.
❏ If liquid is swallowed, rinse your mouth out with water, swallow large quantities of water and
vomit it back up, and consult a physician immediately.
If any foreign objects or liquid such as water enters the printer, stop using it immediately.
An electric shock or fire could occur. Turn off the power and unplug the power cable immediately,
and then contact your dealer or Epson Support.
Warning
!
Do not sit on the product or place any heavy objects on the product.
The printer could tip over or break and cause an injury.
When transporting or storing the product, be sure that it is level: do not tilt it at an angle or
place it upside down.
Ink could leak.
Be careful not to trap your hands or fingers when opening or closing the front or maintenance
cover.
Failure to observe this precaution could result in injury.
When connecting cables or optional accessories, make sure they are installed in the correct
direction and that you follow the procedures exactly.
A fire or an injury could occur. Install the printer correctly by following the instructions in the
manual.
When moving the product, make sure it is turned off, the power cable is unplugged from the
outlet, and all connecting cables have been removed.
If cables are damaged, an electric shock or fire could occur.
See the manual to make sure the media and the roll core for the auto take-up reel unit are
secured correctly.
Dropping media or take-up rolls could result in injury.
Follow the instructions in the manual when removing media or take-up roll.
Dropping media or take-up rolls could result in injury.
Be sure that your hands or hair do not get caught in the media feeding unit or auto take-up reel
unit while it is operating.
Failure to observe this precaution could result in injury.
See that the stand levelers are secured at all times except when moving the printer.
If they are not secured, an accident could occur.
The dryer may become hot, requiring that care be observed during operation.
Failure to observe the necessary precautions could result in burns.
Do not reach inside the dryer.
Failure to observe the necessary precautions could result in burns.
EN Important Safety Instructions
Caution
3