Other Notes - Epson SC-F10000 Serie Guía De Inicio

EN Important Safety Instructions
Notes on the Power Supply
Make sure the blades on the plug are inserted completely into the power outlet.
An electric shock or fire could occur.
Unplug the plug regularly and clean between the blades and around the base of the blades.
If the plug is plugged in for an extended period of time, dust collects around the base of the blades
and a short circuit or fire could occur.
When unplugging the plug, grip the plug itself; do not pull the power cable.
If the cable is damaged or the plug is deformed, an electric shock or fire could occur.
Do not insert or unplug the plug with wet hands.
An electric shock could occur.
To prevent ground leak accidents, connect to a grounded (earthed) outlet.
Connecting to anything other than a grounded outlet could result in electric shock or fire.
Use only the type of power source indicated on the printer's label.
An electric shock or fire could occur.
Do not use the plug if any foreign objects such as dust have adhered to the plug.
An electric shock or fire could occur.
Do not use any other power cables except for the cable supplied with the printer. Also, do not
use the power cable supplied with the printer for any other devices.
An electric shock or fire could occur.
Do not use the power cable if it is damaged.
An electric shock or fire could occur. If the power cable is damaged, contact Epson Support. Note
the following points to avoid damaging the power cable.
❏ Do not modify the power cable.
❏ Do not place anything heavy on the power cable.
❏ Do not bend, twist, or pull forcefully on the power cable.
❏ Do not route the power cable near heaters.
If you are not going to use the printer for an extended period, unplug the printer for safety
reasons.
4
!
Warning
!
Caution
Notes on Consumables (Ink, Media, and so on) and Waste Ink
Read the "Safety data sheet" before handling ink*, cleaning liquid, or waste ink. You can download it at
your local Epson Web site.
The asterisk (*) indicates consumable items (sold separately).
During maintenance, wear protective clothing, including protective eyewear, gloves, and a
mask.
Take the following actions immediately should ink, waste ink, or cleaning liquid contact your
skin or enter your eyes or mouth:
❏ If fluid adheres to your skin, immediately wash it off using large volumes of soapy water. Consult
a physician if the skin appears irritated or is discolored.
❏ If fluid enters your eyes, rinse immediately with water. Failure to observe this precaution could
result in bloodshot eyes or mild inflammation. If problems persist, consult with a physician.
❏ If fluid enters your mouth, consult a physician immediately.
❏ If fluid is swallowed, do not force the person to vomit, and consult with a physician immediately.
If the person is forced to vomit, fluid may get caught in the trachea which can be dangerous.
Store ink cartridges, cleaning liquid, and waste ink in a location out of reach of children.
When cutting media, be careful not to cut your fingers or hands with the cutter or other blades.
Do not shake ink cartridges too forcefully.
Shaking cartridges too forcefully could cause them to leak ink.
Do not rub your hands along the edges of the media.
The edges of the media are sharp and can cause injury.
Because the media is heavy, it should not be carried by one person.
We recommend using the lifter for media that is heavier than 40 Kg.
Do not disassemble ink cartridges.
Ink leaking from disassembled cartridges could enter your eyes or adhere to your skin.

Other Notes

Be sure your power cable meets relevant safety standards of the area where you plan to use it.
!
Caution