Important Safety Instructions; Meaning Of Symbols - Epson SC-F10000 Serie Guía De Inicio

EN
Introductions
This manual takes you through the steps involved after installation, from checking the supplied
accessories through to actual use. Keep this manual where it can be used to help resolve any
questions you may have regarding the product.

Meaning of Symbols

The symbols on this manual and Epson product are used in order to ensure safety and proper use
of the product and to prevent danger to customers and other persons, and property damage. The
symbols indicate the meaning below.
!
Warning Warnings must be followed to avoid serious bodily injury.
!
Caution
Cautions must be followed to avoid bodily injury.
c
Important : Important must be followed to avoid damage to this product.
Note : Notes contain useful or additional information on the operation of this
product.
Hot surface
Risk of electric shock
Do not touch
Stand-by
Caution! Shock hazard
When problems occur, or when moving the printer, or installing
optional accessories, unplug all power cables to completely turn
off the power.
Hot parts!
Do not reach inside parts indicated by these icons. Failure to
observe this precaution could result in burns.
Hot parts!
Parts indicated by this icon may become hot, requiring that care
be observed during operation. Failure to observe this precaution
could result in burns.
2
Caution, Warning
Keep hands clear Prohibition
Disconnection
Alternating Current
(All power plugs)
ON (Power) OFF (Power)
EN

Important Safety Instructions

This section lists precautions that must be taken to use the product safely and prevent damage to
property or injury to operators or others.
Notes on Installing
Do not obstruct the vents on the product.
If the vents are obstructed, the internal temperature could rise and cause a fire. Do not cover the
printer with a cloth or install it in a location with poor ventilation. Make sure you secure sufficient
space for the installation as described in the manual.
U User's Guide (Online Manual)
Do not setup or use this product in an area where children may come close.
Children may be injured by the equipment.
Do not install or store the printer in an unstable location or a location subject to vibrations from
other equipment.
The printer could fall or tip over and cause an injury.
Do not install the printer in locations subject to oily smoke and dust, or in locations subject to
humidity or where it could easily get wet.
An electric shock or fire could occur.
Do not tilt the product more than 10 degrees forward, back, left, or right while moving it.
Failure to observe this precaution could result in the printer falling over, causing accidents.
Because the product is heavy, it should not be carried by one person.
A minimum of five people are needed to carry the printer. See the following for details on the
product's weight.
U User's Guide (Online Manual)
Do not attempt to move the printer while the stand levelers are secured.
Failure to observe this precaution could result in the printer falling over, causing accidents.
When moving the printer while it is on the stand, avoid locations with steps or uneven flooring.
Failure to observe this precaution could result in the printer falling over, causing accidents.
!
Warning
!
Caution