822_949_158 M2500.book Seite 12 Montag, 18. Februar 2008 12:13 00
g
The Pulse Button runs the blender at
full speed.
0 When you have finished using the
blender, turn the tank clockwise and
remove. Then turn the lid clockwise
and remove.
Do not let the blender run for more
1
than 3 minutes at a time. After run-
ning for 3 minutes, the blender should
be left to cool for at least 10 minutes.
Dual Safety System
The appliance has a dual safety feature.
This prevents the blender from being
operated if the lid or the tank have not
been positioned correctly.
1
You should nevertheless still keep
children away from the appiance.
Ice crushing
The blender can be used for crushing
ice. Always add a little water to the
tank before using the blender to crush
ice.
0 Pour the water into the tank.
0 Switch the blender on. Either speed
may be selected. However, we recom-
mend using the Pulse Button, as this
will crush the ice more quickly.
0 You can add more ice through the filler
hole in the lid while the blender is run-
ning.
Care and Cleaning
1
Before cleaning the blender, take the
plug out of the socket.
1
Make sure that no liquids get inside
the motor casing!
Clean the casing with a damp cloth.
1
Never immerse in water or clean
under running water.
The tank and blade assembly can be
3
cleaned quickly and safely using the
Pulse Button.
12
0 Pour warm water into the tank, with a
few drops of washing-up liquid.
0 Mix the water and wahing-up liquid,
by pushing the Pulse Button briefly.
0 Finally, rinse the tank under running
water.
If necessary, the blade assembly can
3
also be cleaned separately.
Be careful when rinsing the blade
1
assembly (The blades are sharp!). Use
only water and washing-up liquid.
Never put parts of the appliance in a
dishwasher.
When replacing the blade assembly,
turn it clockwise using the filler cup as
tool. See paragraph "Assembling the
Blender".
Disposal
Packaging material
2
The packaging materials are environ-
mentally friendly and can be recycled.
The plastic components are identified by
markings, e.g. >PE<, >PS<, etc. Please
dispose of the packaging materials in
the appropriate container at the com-
munity waste disposal facilities.
2
Old appliance
W
The symbol
on the product or on
its packaging indicates that this pro-
duct may not be treated as household
waste. Instead it shall be handed over
to the applicable collection point for
the recycling of electrical and electro-
nic equipment. By ensuring this pro-
duct is disposed of correctly, you will
help prevent potential negative conse-
quences for the environment and
human health, which could otherwise
be caused by inappropriate waste
handling of this product. For more
detailed information about recycling
of this product, please contact your
local city office, your household waste
disposal service or the shop where you
purchased the product.