Honda Power Products EU65is Manual De Explicaciones página 46

4. Clean the air cleaner element in warm soapy water, rinse, and allow
to dry thoroughly, or clean in nonflammable solvent and allow to
dry.
5. Dip the air cleaner element in clean engine oil, then squeeze out all
excess oil. The engine will smoke when started if too much oil is left
in the filter.
1. Soak
6. Wipe dirt from the air cleaner housing and cover using a moist rag.
Be careful to prevent dirt from entering the air duct that leads to the
carburetor.
7. Install the air cleaner element to the air cleaner housing and reinstall
the air cleaner cover and secure the cover screws.
8. Close the left maintenance cover.
AIR CLEANER ELEMENT
2. Squeeze and Dry
Do not twist.
3. Oil 4. Squeeze
Do not twist.
43