Transport And Storage; Maintenance And Disposal - Steelcase FrameFour Workbench Guía Rápida

5. Operation
The FrameFour Workbench may be used and operated only in perfect technical condition and in
compliance with these operating instructions.
Before you put desk fittings or other objects on the table, ensure the following:
The table has been assembled in accordance with the accompanying assembly instructions.

The maximum permissible useful load of the table must not be exceeded.

The adjusting screws for the height levelling on the table foot must not be screwed out more

than 20 mm.

6. Transport and storage

Check the delivery contents:
After unpacking, check the product immediately for damage sustained during transportation and
for completeness; inform the manufacturer of any damage as soon as possible.
Assembling the workbench:
Please follow the accompanying assembly instructions for assembling the workbench. Proper
assembly of the electrical components and installations should be checked by a qualified
electrician.
Removing or rearranging the workbench:
Please follow the separate recycling and disassembly instructions when removing the workbench.
EN
Before removing or rearranging the table, it is essential to disconnect the mains plug of the multiple
socket.

7. Maintenance and disposal

Function check:
Interval
Regularly
-||-
regularly according
to accident
prevention
regulations and
recognised rules of
technology
Cleaning:
Clean the product regularly with a slightly moist cloth and mild detergents (only for melamine

and veneer surfaces).
Tip: Lime-deficient water reduces streaks and lime stripes.
144100
Inspection point Function check Required condition
Fastening elements Fastening
of the workbench
Fastening elements Position and
of the accessories attachment
Electrical Condition
components and
installations
F r a m e F o u r W o r k b e n c h
Action (if
necessary)
All the screws and
Retighten screws
fastening elements
/ fix fastening
are tight/fixed
elements
All the screws and Retighten screws
fastening elements / fix fastening
are tight/fixed elements
All electrical Have electrical
components and components or
installations are installations
undamaged replaced by a
qualified
electrician
Rev. C